If your Audi still shows fault code C123EF0 after the brake servo pressure sensor has been replaced, you may have been told it needs a new ABS unit. At CT Cars, we can reprogramme the original unit while it’s still fitted to compatible Audis, once the fault that caused the problem has been fixed.
One Audi came into our workshop with C123EF0 still showing after another garage had replaced the brake servo pressure sensor. We cleared the fault by reprogramming the original ABS unit while it was still fitted to the car. On another Audi with the same code, we needed to replace the sensor first. That’s why we check what’s already been fixed before we decide what the car needs next.
How does the fault start?
The first code can be C11EC04, which points to the brake servo pressure sensor. The brake servo is what helps you press the brake pedal without having to use as much force. If this code comes up on a diagnostic scan, we check the sensor and the vacuum system that supplies the servo to find out what’s causing it.
When there’s a problem with that system, the ABS unit can step in to provide extra braking assistance. Audi calls this hydraulic boost compensation. There’s a limit to how many times the system can step in. Once it reaches that limit, it stores C123EF0, which you may see on a diagnostic report as Hydraulic Brake Booster Limit Value Reached.
There’s no reliable mileage or timescale for when that second code might appear. If a scan has picked up C11EC04, it’s worth getting the cause checked promptly.

What might you see on the dashboard?
Once C123EF0 is logged, you may see the ABS, stability control and brake warning lights come on together, sometimes with a braking system fault message.
If a red brake warning comes on, the dashboard tells you to stop or the brakes feel different, stop as soon as it’s safe and call your breakdown provider for recovery.
Why is the fault still there after the sensor has been replaced?
Replacing a faulty sensor can fix the problem that started it. Once the ABS unit has reached its limit, though, a routine fault-code clear won’t clear C123EF0. That’s why the warnings can still be there after the sensor has been replaced, and why you may be advised to fit a new ABS unit.
Another option is to have the unit removed and sent away for repair. On a compatible Audi, we can reprogramme the existing unit while it’s still fitted. We first make sure the original brake-assistance fault has been fixed.
Which Audis can we help with?
This fault can affect some Audi A4, A5, A6, A7 and A8 models, including some RS variants, as well as the Q5, Q7 and Q8. We’ll check whether we can work on your car before you book.
The programming itself usually takes a few hours. If we also need to diagnose or repair the original fault, allow extra time for that. We carry out the work at our workshop and may be able to offer a mobile visit depending on the car and where it is.
Why choose CT Cars for Audi brake fault repairs?
We’re an independent Audi specialist in West Horsley, Surrey. Whether you’ve just had a brake fault diagnosed or you’ve already been quoted for a new ABS unit, we can check what’s causing the warning and tell you if on-car reprogramming is an option.
Send us your registration, a copy of the diagnostic report if you have one, and details of any repairs already carried out. We’ll talk you through the next step before you arrange transport.
Contact CT Cars or call 01483 285792 to discuss your Audi or book a diagnostic check.



